Installation steps and precautions for steel bar cutting machine

The composition of the steel bar cutting machine includes: motor, belt transmission mechanism, flywheel, gear reduction mechanism, key mechanism, crankshaft slider, and replaceable cutting tool. At present, it has been widely used in our daily life, covering various fields of life, bringing great convenience to the work of mechanical equipment personnel, while also ensuring everyone's safety, shortening work hours, and improving work efficiency. However, most people are not very clear about the specific installation process of this type of equipment. As a large manufacturer of steel bar cutting machinery, Jietuo Electromechanical has a very comprehensive knowledge of this type. This article provides a detailed explanation of the installation precautions for steel bar cutting machines.

Steel bar cutting machine

Firstly, when installing the steel bar cutting machine, it is necessary to carefully study its installation location and ensure that it is installed on a relatively flat and solid ground. Because its weight is very heavy, if it cannot be placed smoothly in a relatively flat place, their work will not be very stable. Long term use will have a significant impact on the machinery and also affect its service life. If it cannot be placed on a solid ground, its own weight will lead to mechanical decline, which will also have a certain impact on the effectiveness of use.

Secondly, when installing the load-bearing frame, it is necessary to follow the corresponding steps. That is to say, the center of the material groove on the load-bearing frame should be aligned with the corresponding guide cylinder and straightening cylinder, etc. These holes must not be installed incorrectly or collided, as this will affect the normal operation of the machinery.

In addition, when installing the steel bar cutting machine, it is necessary to maintain the stability of the entire machine to ensure its internal structure is also stable. After installation, it is also necessary to check the corresponding circuits to see if all circuits are normal and if there is any damage to the parts. Then, it can be run again. Only after completing this process can it be used in the next time. If there is any damage, it must be checked again after repair to ensure that the machine is installed correctly, so as to ensure that there is no danger during use.

Maintenance method for steel bar cutting machine:

1. After completing the homework, the tools and debris under the tools should be removed to keep the machine clean. Check the tightness of each bolt and triangular tape; Adjust the gap of the movable blade and replace the dull blade.

2. According to regulations, lubricate the eccentric shaft, sliding bearings, motor bearings, connecting rod caps, and cutting tools with calcium based grease.

3. Perform maintenance every two weeks, check the wear of gears and bearings, and adjust the clearances of various parts.

The above are the installation steps, precautions, and maintenance methods for the steel bar cutting machine. If you want to learn more about related knowledge, please feel free to contact us by hotline at 13819758083. Jietuo Electromechanical is a company specializing in the production and export of portable hydraulic electric steel bar quick breakers, steel bar cutting machines, steel bar bending machines, shear pliers and other tools. With years of production experience, we bring you the best steel bar processing machinery products and high-quality services, making you feel at ease when using them.